Reliance Netconnect Broadband+ on Ubuntu

Reliance datacard to work perfectly on Ubuntu 10.04

1. First of all open up the terminal and run the following command

sudo apt-get update

2. Now we need to install wvdial so run the following command

sudo apt-get install wvdial

3. Now we need to install libusb-dev so run the following command

sudo apt-get install libusb-dev

4. Now we need to download usb-modeswitch and usb-modeswitch-data so go to the following links

usb-modeswitch usb-modeswitch-data . Download both the files and save them on your computer .

5. Now extract both the files and and go to extracted directories on by one (first go to usb-modeswitch). and run the following command as root

sudo make install

6. Now run the following command

sudo gedit /etc/usb_modeswitch.conf

and it will open gedit and paste the following text in it and save the file

# Configuration for the usb-modeswitch package, a mode switching tool for
# USB devices providing multiple states or modes
# This file is evaluated by the wrapper script "usb_modeswitch" in /lib/udev
      # To enable an option, set it to "1", "yes" or "true" (case doesn't matter)
# Everything else counts as "disable"
# Disable automatic mode switching globally (e.g. to access the original
      # install storage)
DisableSwitching=0
# Enable logging (results in a extensive report file in /var/log, named
# "usb_modeswitch_"
EnableLogging=1
# Huawei, newer modems
DefaultVendor= 0x12d1
      DefaultProduct=0x1446
TargetVendor= 0x12d1
TargetProduct=140b
CheckSuccess=5

Now run the following command and it will again open gedit and paste the above text in it again and save it

sudo gedit /etc/usb-modeswitch.conf

7. Now run the following commands

sudo gedit /etc/wvdial.conf

it will again open gedit and you need to paste the following text in it.

[Dialer netconnect]
New PPPD = yes
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyUSB0
ISDN = 0
Username = 93********
      Password = 93*********
Phone = #777
Stupid Mode = 1
Auto DNS = 1
Check Def Route = 1

change the username and password with your 10 digit MDN number given on the box of datacard.
8. Now Save the file and reboot the computer. After reboot plugin your datacard and wait for 5 to 6 seconds . Now run the following command

sudo wvdial netconnect

you should see something like below after running the above command

--> Using interface ppp0
--> local  IP address 115.242.127.250
--> remote IP address 220.224.141.129
--> primary   DNS address 202.138.97.193


Source: http://harbhag.wordpress.com/2010/09/14/reliance-netconnect-broadband-on-ubuntu/